Does Axis Packaging supply H3 treated timber to AS1604?
Yes - and each product is individually tagged and certified.
If I already have my product packaged using timber, can Axis Packaging certify it for export?
Yes - but we will need to fumigate ALL the timber with Methyl Bromide.
Is my timber product able to be exported and does it meet with international regulations?
Yes, ALL Axis Packaging Timber products are compliant with the ISPM15 international shipping regulations and each product is stamped accordingly with the exception of hardwood products.
Can I drop my product to Axis Packaging and have it packaged professionally?
Yes. Axis Packaging are the preferred supplier for freight forwarders in Perth simply because we provide a no-fuss packaging service where you can drop your product to our premises in Kewdale and have it packed, labeled and ready for any form of freight within 24 hrs.
Can Axis Packaging pack my goods at my premises?
Yes. We have several Mobile On-Site Packaging facilities fully equipped to pack anywhere.
Can Axis Packaging package and re-locate an entire plant?
Yes. Axis Packaging have prepared & packaged entire production lines and manufacturing plants for shipment worldwide.
Can Axis Packaging assist with my relocation?
Yes. Axis Packaging have a number of relationships with key removalist companies in Perth.
Can Axis Packaging assist with Freight Forwarding & Logistics?
Yes. Axis Packaging have a number of relationships with key Freight Forwarders & Logistic companies in Perth.
Are there any dimensional restraints when sending goods via Road Freight?
Yes. The vehicle’s dimensions dictate your shipment’s overall dimensions. Generally 2300mm is the maximum width of a truck. Lengths and heights will vary. See our downloads page – Shipping Constraints for a guide (Link).
Are there any dimensional restraints when sending goods via Sea or Rail?
Yes. You are limited to the Internal Dimensions of a Sea Container which can be found on our downloads page – Shipping Constraints (Link).
Are there any dimensional restraints when sending goods via Air Freight?
Yes. If your goods are being freighted from Perth Airport you are limited to the footprint of a standard PMC Airline pallet and height of 1600mm. Please refer to our downloads page – Shipping Constraints (Link).
Can Axis Packaging package my product Australia wide?
Yes. Through our Alliance Partners we can provide our entire range of products & services in ALL the major capital cities in Australia and beyond.
I have an entire shipment that needs to be measured, packed and certified for export. Does Axis Packaging provide the whole service?
Yes. Axis Packaging can Project Manage the packaging of your shipment from start to end. From crane hire, washing & cleaning, quarantine compliance, fumigation and clean ups - you will not need to lift a finger.
Can I get my product Load Tested by Axis Packaging?
Yes. We can have your product Load Tested and Certified.
Does Axis Packaging supply a quarantine compliant plastic pallet for the Gorgon Project?
Yes, please see the Quarantine 1100 and 1165 (Link)
Can Axis Packaging provide quarantine compliant wrapping for the Gorgon Project?
Yes. Axis Packaging are registered with The Kellogg Joint Venture (KJV) as a preferred supplier for wrapping for the Gorgon Project
Can Axis Packaging supply suitable timber products for the Gorgon project?
Yes. Axis Packaging are a preferred supplier to Chevron and provide Treatment Certificates and Serial # Tags for ALL H3 treated timber destined for Barrow Island.
Where can I purchase replacement parts?
Replacements parts are available from Axis Packaging.
Where can I send warranty and repair returns?
Contact Pelican Customer Service at 310-326-4700 (Inside California) or 800-473-5422 (Outside of California) for an RMA# (Returned Merchandise Authorization). Send returns to Pelican Products, Attn: Warranty Department, 23215 Early Avenue, Torrance, CA 90505.
What exactly is Pelican's Unlimited Lifetime Guarantee of Excellence?
For over 30 years, Pelican’s guarantee has been simple: “You Break It, We Replace It…Forever”™ which means that if for any reason you are not satisfied with the quality or performance of the Pelican™ product you have purchased, Pelican Products will gladly replace the product or refund your money (at your option) within 30 days after the purchase through the original Dealer/Retailer. Pelican Products will continue to guarantee the product directly, against breakage or defects in workmanship. This guarantee does not cover the lamp or batteries in lights. The o-rings must be kept greased (and replaced if damaged) per product instructions. (Replace o-rings annually or when damaged.) Any liability, either expressed or implied is limited to replacement of the product. This guarantee is void only if the Pelican™ product has been abused beyond normal and sensible wear and tear. The guarantee does not cover shark bite, bear attack and children under five.
What about custom sizes and colors?
Custom sizes may be available based on many factors. Please contact Pelican’s sales department for more detailed information. The cases are available in custom colors based on customer requirements. There are certain conditions that must be met when making cases in custom colors so please contact Pelican’s sales department for more detailed information.
What type of lubricant should be used on the o-ring?
Use only silicone grease lubricants to maintain the life of the o-ring and preserve the watertight properties of your case.
What is the o-ring made of?
The o-ring is made of EPDM or Ethylene Propylene Diene Monomer. It is well known for its excellent ozone, weathering and aging resistance. It also has excellent water and steam resistance, maintains its flexibility at low temperatures, features excellent resistance to alkalis, acids and oxygenated solvents and is very color stable. (It is not recommended for resistance to oil, gasoline and hydrocarbon solvents.) EPDM is found in a wide range of applications and is excellent for use outdoors.
How does the Pressure Equalization Valve work?
The Pressure Equalization Valve is a simple device. It consists of a housing with a hole through it that is covered with a thin Gore-Tex® membrane. According to the Gore™ tech sheet: “The microporous expanded polytetraflouroethylene (ePTFE) membrane continuously allows the free passage of gases and vapors, equalizing the pressure differential between the enclosure and ambient before it builds to the point that a seal is compromised. Water, dust and dirt are repelled by the hydrophobic membrane, thereby protecting expensive and sensitive electronics.”
Are the cases water resistant?
Yes, the cases are water resistant. There is an o-ring in the lid and a Gore-Tex® membrane in the pressure equalization valve that keep water out of the case.
What testing have you done? Certifications?
Pelican cases have been tested to MIL-C-4150J, ATA 300, Def Stan 81-41/STANAG 4280 and Ingress Protection (IP). Certificates are on file and copies are available upon request. Please note that for deep submersion internal bulkheads should be installed.
Are there any hazardous substances in the case material?
RoHS, or “Restriction on Hazardous Substances” - RoHS specifically bans or restricts the use of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated biphenyl ethers (PBDE). At the July 1, 2006 implementation of the RoHS provisions, Pelican cases will not contain the banned or restricted materials and will therefore be RoHS compliant. NOTE: Directive 2000/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment – is aimed at reducing the hazardous materials content in electronic products as well as increasing the recycling efforts for these products.
What adhesives and/or paints can be used on the cases?
Due to the nature of the polypropylene being chemically inert, very little will attack the material. That also means that very few adhesives and paints will adhere satisfactorily. For an adhesive, we have found that 3M’s DP-8005 two-part adhesive works very well with our case material. It has also been reported that “Shoe Goo” works very well. For paint, Krylon has a product out called Fusion that they claim will adhere to polyolefin-based materials like polypropylene. Please visit our Technical Bulletins page under SUPPORT for more details and a list of recommended adhesives.
What temperatures can the cases tolerate?
The cases will withstand temperatures from -10°F (-23.3°C) to +210°F (98.9°C).
What material(s) are the cases made from?
The cases are made out of a Polypropylene copolymer material that is light weight, durable and highly chemical resistant.
